Product Description
FEATURES
Detect metal objects in all directions
High precision identifying system
Auto power off
Low power consumption
Shock resistance
Small size, light weight
Waterproof design, lP degree of IP55
SPECIFICATIONS
sensitivity: 30mm( for one dollar coin )
Alarm Mode:
Mode 1: Vibration and buzzer sound alarm mode
Mode 2: Buzzer sound alarm mode
Mode 3: Vibration alarm modeOperating
Environment:
Temperature: -20’C to 60°C
Relative Humidity:<90%
Battery: 9V battery, 6F22 or equivalent, 1 piece
Dimensions: 231.5mm x47mm x40mm
Weight: About 165g
Hold the detector by the handle.
Make sure thatthe detector is far away from any metal object, and then press the power button briefly to turn on the detector.
The illumination light will light up, and thedetector will vibrate once and/or sound a beep indicating that the detector has been turned on.
AUTOMATIC POWER OFF
If you have not pressed the power button and the detector has not detected any metal object for about 5 minutes, the detector will start to prompt with vibration and/or buzzer sound every 12 secs. And after six prompts, the detector will turn offautomatically.
Note: lf any metal object is detected or the power button is pressed, the prompt will be cancelled and the timer will reset.
Illumination Function
After the detector is turned on and calibrated, you can press and hold the power button for about 2 seconds to enter the alarm-mode-switching state. The illumination light will flash as an indication. The detector defaults to enter the alarm mode with vibration and buzzer sound. Press the power button once to switch to the buzzer sound alarm mode.and press it again to switch to the vibration alarm mode. After selecting the desired mode, press and hold the power button for about 2 seconds to confirm it, or wait for about 5 seconds for the detector to automatically confirm.
Note: After the next power-up, the detector will default to the alarm mode confirmed in the previous use.
Reviews
There are no reviews yet.